Overview
7inch Capacitive Touch Display for Raspberry Pi, 800 x 480, TFT Wide Angle, MIPI DSI Interface.
Compatible with Raspberry Pi 4B/3B /3A /3B/2B/B /A , Compute Module 4 /3 /3. Note: Another DSI Cable is required for Compute Module 4 /3 /3.

User Guide

①Hardware connection
1) Connect the DSI interface of 7inch DSI LCD to the DSI interface of Raspberry Pi with a 15PIN FPC cable.
2) Use the 2PIN power cable to connect the power interface of the LCD to the 40PIN GPIO interface of the Raspberry Pi.
3) For easy use, the Raspberry Pi can be fixed to the back of the 7inch DSI LCD with screws and assembled with copper pillars.

②Software setting
Supports Raspberry Pi OS / Ubuntu / Kali and Retropie systems for Raspberry Pi.
1) Download the image from the Raspberry Pi website.
2) Download the compressed file to the PC, and unzip it to get the .img file.
3) Connect the TF card to the PC, and use SDFormatter software to format the TF card.
4) Open the Win32DiskImager software, select the system image downloaded in step 2, and click ‘Write’ to write the system image.
5) After the programming is completed, open the config.txt file in the root directory of the TF card, add the following code at the end of config.txt, save and eject the TF card safely.
6) Power on the Raspberry Pi and wait for a few seconds until the LCD displays normally. And the touch function can also work after the system starts.

More Details of User Guide/Backlight Controlling/FAQ,etc. Please check Online Resource: //bit.ly/44bWaIo

Package Content
7inch DSI LCD x1
FPC 15PIN 1.0 pitch 50mm (opposite sides) x2
PH2.0 2PIN wire 10cm x1
Screws pack x1