For Daelim ALL With Digital Trip / ODO ALL YEARS
Setup:
You need to setup the module after installation. When ignition is turned on, the
display counts wards (6 to 1) indicating that the memory is clear.
- Raise the rear wheel off the ground by using a stand, and start the
engine in Neutral. (If you do not have a stand, you may setup the unit while
riding. Find a long, straight with light traffic.)
- The display will blink "1".
Select first gear, release the clutch, and keep the RPM above idle speed.
The display is blinking faster while the unit is learning the gear.
- When the display shows "2", select second gear.
Repeat this process until all gears are thought (5 or 6).
The unit is progmed and should indicate the gears correctly.
If you have any questions, please feel free to contact us. We will solve your problem at the first time.